You have decided to install a wireless camera to keep your home safe. First thing you will need to do is have the tools you need, this usually consist of a screwdriver, drill and a pen to mark your spot. Next you will need to decide where you are going to install your camera to keep you home safe, making sure it is at the right angle.
Your camera should have come with some brackets, you need to hold the bracket up to where you are going to install and mark the holes that the screws go into, take your drill and drill holes on the places you marked. You can then put 
the bracket back up using the screws. Plug in it or put in the batteries and you should be all set.
If you are installing a camera inside your home, you will need to do the same procedure but make sure you find a stud in your wall to install the bracket. Make sure you check the lighting before you install your camera, make sure the receiver is close enough to pick up. After you have it all installed it is very important to test it, make sure it is fixed on the area you want to record and that you are getting a clear view. You may need to do some adjustments. Most people can install a camera by themselves but if your not sure you may want to hire a professional to come and install it for you. [phpbay]security system, 20, 48633, “surveillance”[/phpbay]